Name: Sĩ Nguyên (Mr) khotudonghoa.com - tmplaboratory.com Mail: Sale08@tmpvietnam.com Mobile Phone: 0917.543.068 - 01654.00.88.66  Và rất nhiều hãng khác:  AT2E, AiraValve, As scholer, Ametek PI, Ametek test, Bircher,  Barksdale, Beckhoff, Busmann, Baumuller, Baumer,  DaiiChi, Dillon, Elau, Elettrotek Kabel, IBA,  Kern Sohn, Keller, Kiepe, Mark 10, Matsushima, Matsui, Masibus, Maxonic, Mehrer, Nireco, Pilz, Pora,  Pentair, Redlion, Rotork, Soldo, Teclock, TDK Lambda, Telco Sensors, Yokogawa, Wise,  Wago, Wittenstein, Asa – RT, Aviteq, Bihl wiedemann, Brevini, Conatec, Gemu, Kyowa,  Mdexx, Megatron, Meinsberg, Microsonic, Meinsberg, Microsonic, MKS Anlasser, Novotechnik,  PMA, PS electric, Schiebel, Singerland Bremsen, Spohn Burkhardt, Sytstec,  STI Vibration Monitoring, Tematec, Van Der Graaf, Vaccum Barrier, DedaWeld,  Orion Instrument, PCI-Instrument, PCE-Instrument, Dillon, Fotoelektrik Pauly, Keofitt,  IPF, BarkDale, Endress Hauser, OMEGA, Orion Instruments, Hans Schmidt, Koganei BK1120 EtherCAT Bus Coupler - Beckhoff VietNam BK1120 | EtherCAT Bus Coupler The BK1120 Bus Coupler connects EtherCAT, the real-time Ethernet system, with the modular, extendable electronic terminal blocks. A unit consists of a Bus Coupler, any number (between 1 and 64) of terminals (255 with K-bus extension) and one end terminal. The Bus Coupler recognises the connected Bus Terminals and automatically allocates them into the EtherCAT process image. The Bus Coupler is connected to the network via the upper Ethernet interface. The lower RJ45 socket may be used to connect further EtherCAT devices in the same strand. In the EtherCAT network, the BK1120 Bus Coupler can be installed anywhere in the Ethernet signal transfer section (100BASE-TX) – except directly at the switch. The Bus Coupler BK9000 (for K-bus components) is suitable for installation at the switch. EtherCAT (Ethernet Control Automation Technology) is the Ethernet solution for industrial automation, characterised by outstanding performance and particularly simple handling. EtherCAT enables the Ethernet star topology to be replaced with a simple line structure. Optionally, EtherCAT may also be wired in the “classic” way using switches, in order to integrate further Ethernet devices. The master requires no special plug-in card and can be implemented on any existing Ethernet controller using a very simple interface. EtherCAT is therefore also well suited to small and medium control applications, where it will also open up new areas of application for distributed I-Os. For EtherCAT a separate I-O system in protection class IP 20 is available in the form of EtherCAT Terminals. In contrast to Bus Terminals, where the fieldbus signal is implemented within the Bus Coupler on the internal, fieldbus-independent terminal bus, the EtherCAT protocol remains fully intact down to the individual terminal. The ELxxxx EtherCAT Terminals are connected via associated EKxxxx-type EtherCAT Couplers (see EtherCAT section). System data EtherCAT | BK1120 Number of I-O stations 65,535 Number of I-O points depending on controller Data transfer medium Ethernet-EtherCAT Cat.5 cable Max. cable length 100 m (100BASE-TX) Data transfer rates 100 Mbaud Data transfer time 0.01 ms in the case of 10 modules for 32 bit inputs and outputs each (without K-bus run-time) Technical data BK1120 Number of Bus Terminals 64 (255 with K-bus extension) Max. number of bytes fieldbus 1024 byte input and 1024 byte output Configuration possibility via KS2000 or EtherCAT (ADS) Bus interface 2 x RJ45 Power supply 24 V DC (-15 %+20 %) Input current 70 mA + (total K-bus current)4, 500 mA max. Starting current approx. 2.5 x continuous current Recommended fuse ≤ 10 A Current supply K-bus 1750 mA Power contacts 24 V DC max.10 A max. Electrical isolation 500 V (power contact-supply voltage-Ethernet) Distance between stations 100 m (100BASE-TX) Weight approx. 150 g Operating-storage temperature -25…+60 °C-40…+85 °C Relative humidity 95 %, no condensation Vibration-shock resistance conforms to EN 60068-2-6EN 60068-2-27 EMC immunity-emission conforms to EN 61000-6-2EN 61000-6-4 Protect. class-installation pos. IP 20-variable Approvals CE, UL, Ex Accessories   KS2000 configuration software for extended parameterisation Cordsets cordsets and connectors FC9001-0010 | FC9011 Ethernet PCI fieldbus cards Related products   BK1150 EtherCAT “Compact” Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension) BK1250 EtherCAT “Compact“ Coupler between EtherCAT Terminals (E-bus) and Bus Terminals (K-bus), adapter terminal CX8010 EtherCAT Embedded PC System   EtherCAT For further EtherCAT products please see the system overview